Add calibration include to user_settings.cfg

- Added [include calibration/*.cfg] to optimized_user_settings.cfg
- Updated CHANGES.md with complete deployment steps
- Updated calibration/README.md with installation options

Now the calibration macros are automatically available when using
the optimized user_settings.cfg - no manual include needed!

CHANGES.md

@@ -73,16 +73,33 @@ gcode:
    cp user_settings.cfg user_settings.cfg.backup-$(date +%Y%m%d)
    ```
 
-2. **Copy optimized file:**
+2. **Clone repo (if not done):**
    ```bash
-   cp optimized_user_settings.cfg ~/printer_data/config/user_settings.cfg
+   cd ~/printer_data/config
+   git clone https://git.sky-net.it/nocci/open4neptune-new.git
    ```
 
-3. **Restart Klipper:**
+3. **Copy calibration folder:**
+   ```bash
+   cp -r open4neptune-new/calibration/ ~/printer_data/config/
+   ```
+
+4. **Copy optimized user_settings.cfg:**
+   ```bash
+   cp open4neptune-new/optimized_user_settings.cfg ~/printer_data/config/user_settings.cfg
+   ```
+
+5. **Restart Klipper:**
    - Via Mainsail/Fluidd: Machine → Restart Firmware
    - Or SSH: `sudo systemctl restart klipper`
 
-4. **Test print** and observe:
+6. **Test calibration macros:**
+   ```gcode
+   ; In Mainsail Console:
+   CALIBRATION_MENU
+   ```
+
+7. **Test print** and observe:
    - Check console for "Starting Print Sequence..."
    - Verify Cartographer Touch Home runs
    - Monitor temperature wait times

calibration/README.md

@@ -2,10 +2,43 @@
 
 ## Installation
 
-1. Copy all `.cfg` files to your Klipper config directory
-2. Add `[include calibration/*.cfg]` to your `printer.cfg`
-3. Restart Klipper
-4. Run `CALIBRATION_MENU` to start
+### Option A: Via user_settings.cfg (Recommended)
+
+1. **Clone repo to config directory:**
+   ```bash
+   cd ~/printer_data/config
+   git clone https://git.sky-net.it/nocci/open4neptune-new.git
+   ```
+
+2. **Copy calibration folder:**
+   ```bash
+   cp -r open4neptune-new/calibration/ ~/printer_data/config/
+   ```
+
+3. **The include is already in optimized_user_settings.cfg:**
+   ```ini
+   [include calibration/*.cfg]
+   ```
+
+4. **Restart Klipper**
+
+### Option B: Direct include in printer.cfg
+
+1. **Copy calibration folder** to `~/printer_data/config/calibration/`
+
+2. **Add to printer.cfg** (at the end, after other includes):
+   ```ini
+   [include calibration/*.cfg]
+   ```
+
+3. **Restart Klipper**
+
+### Test Installation
+
+```gcode
+; In Mainsail/Fluidd Console:
+CALIBRATION_MENU
+```
 
 ---
 

optimized_user_settings.cfg

@@ -1,4 +1,11 @@
-[include KNCM_settings.cfg]
+# ============================================================================
+# USER SETTINGS - Neptune 4 Plus with Cartographer 3D
+# ============================================================================
+# Includes are loaded in order - later includes override earlier ones
+# ============================================================================
+
+[include KNCM_settings.cfg]           # Nozzle cleaning macros
+[include calibration/*.cfg]           # Calibration suite (Z-offset, PA, etc.)
 
 [skew_correction]