nocci/open4neptune-new
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Add Orca Slicer profiles for dual hotend setup

Browse source 
- process_original.json: Original Elegoo Hotend (15 mm³/s)
- process_bambu.json: Bambu Lab Hotend (23 mm³/s, steel nozzle)
- filament_pla_original.json: PLA for Original Hotend
- filament_pla_bambu.json: PLA for Bambu Hotend (+5°C, shorter retract)
- README.md: Complete documentation with installation guide

Key differences:
- Max flow: 15 vs 23 mm³/s
- Retract: 2.5mm vs 1.8mm
- Temp offset: +5°C for Bambu (steel nozzle)
- Pressure Advance: 0.027 vs 0.022
- Speeds: Higher for Bambu hotend

TODO: Add PETG, ABS, TPU, Carbon profiles
This commit is contained in:
root 2026-03-12 10:40:44 +00:00
parent 673e2d1eff
commit f49165cda0
5 changed files with 1000 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

156
orca-profiles/Neptune4Plus-Bambu/filament_pla_bambu.json Normal file
View file

@ -0,0 +1,156 @@
{
"name": "PLA - Bambu",
"instantiation": "2026-03-12",
"note": "PLA Filament Profile for BAMBU LAB Hotend (23 mm³/s, steel nozzle)",
"type": "filament",
"filament_settings": {
"filament_type": "PLA",
"filament_density": 1.24,
"filament_cost": 20,
"filament_weight": 1000,
"filament_spool_weight": 0,
"filament_diameter": 1.75,
"filament_max_volumetric_speed": 23.0,
"nozzle_temperature": 210,
"nozzle_temperature_initial_layer": 215,
"nozzle_temperature_reduction": 0,
"nozzle_temperature_reduction_initial_layer": 0,
"reduce_initial_layer_print_speed": 0,
"initial_layer_print_speed": 50,
"temperature_change_window": 3,
"bed_temperature": 60,
"bed_temperature_initial_layer": 65,
"bed_temperature_initial_layer_reduction": 0,
"cool_plate_temp": 60,
"cool_plate_temp_initial_layer": 65,
"textured_plate_temp": 65,
"textured_plate_temp_initial_layer": 70,
"hot_plate_temp": 80,
"hot_plate_temp_initial_layer": 85,
"filament_retraction_minimum_travel": 1.5,
"filament_deretraction_speed": 45,
"filament_toolchange_delay": 0,
"filament_cooling_final_temperature": 140,
"filament_cooling_initial_temperature": 215,
"filament_cooling_zone_pause": 0,
"filament_cooling_zone_fan": 100,
"filament_cooling_zone_fan_pause": 0,
"filament_wipe_temperature": null,
"filament_wipe_pause": 0,
"filament_wipe_speed": 45,
"filament_park_position": 0,
"filament_park_speed": 45,
"filament_load_speed": 45,
"filament_unload_speed": 45,
"filament_ramming_volume": 0,
"filament_ramming_volume_external": 0,
"filament_ramming_flow": 1,
"filament_ramming_acceleration": 9000,
"filament_deretraction_extra_length": 0,
"filament_deretraction_extra_speed": 0,
"filament_retract_before_wipe": 0,
"filament_wipe_before_retract": 0,
"filament_retract_restart_extra": 0,
"filament_retract_restart_extra_speed": 0,
"filament_retract_lift": 0,
"filament_retract_lift_enforce": "all_surfaces",
"filament_retract_lift_above": 0,
"filament_retract_lift_below": 0,
"filament_retract_when_changing_layer": 1,
"filament_retract_on_stop": 0,
"filament_retract_speed": 45,
"filament_retract_length": 1.8,
"filament_z_hop": 0,
"filament_z_hop_types": "normal",
"filament_z_hop_threshold": 1.0,
"compatible_printers": ["Elegoo Neptune 4 Plus"],
"compatible_printers_condition": "hotend == \"bambu\"",
"filament_start_gcode": "; Filament Start - Bambu Hotend (Steel Nozzle)\nM117 Printing PLA (Bambu)...\n",
"filament_end_gcode": "; Filament End - Bambu Hotend\n",
"filament_cost_update_behavior": "use_average",
"filament_weight_update_behavior": "use_average",
"filament_is_support": 0,
"filament_soluble": 0,
"filament_dissolve_interval": 0,
"filament_flow_ratio": 0.98,
"filament_max_speed": 0,
"filament_minimal_purge_on_wipe_tower": 15,
"filament_pressure_advance": 0.022,
"filament_retraction_extra_length": 0,
"filament_retraction_minimum_travel": 1.5,
"filament_retract_restart_extra": 0,
"filament_retract_restart_extra_speed": 0,
"filament_deretraction_extra_length": 0,
"filament_deretraction_extra_speed": 0,
"filament_retract_lift": 0,
"filament_retract_lift_enforce": "all_surfaces",
"filament_retract_lift_above": 0,
"filament_retract_lift_below": 0,
"filament_retract_when_changing_layer": 1,
"filament_retract_on_stop": 0,
"filament_retract_speed": 45,
"filament_retract_length": 1.8,
"filament_z_hop": 0,
"filament_z_hop_types": "normal",
"filament_z_hop_threshold": 1.0,
"filament_ramming_volume": 0,
"filament_ramming_volume_external": 0,
"filament_ramming_flow": 1,
"filament_ramming_acceleration": 9000,
"filament_wipe_temperature": null,
"filament_wipe_pause": 0,
"filament_wipe_speed": 45,
"filament_park_position": 0,
"filament_park_speed": 45,
"filament_load_speed": 45,
"filament_unload_speed": 45,
"filament_cooling_final_temperature": 140,
"filament_cooling_initial_temperature": 215,
"filament_cooling_zone_pause": 0,
"filament_cooling_zone_fan": 100,
"filament_cooling_zone_fan_pause": 0,
"filament_toolchange_delay": 0,
"filament_deretraction_speed": 45,
"filament_retract_before_wipe": 0,
"filament_wipe_before_retract": 0,
"filament_vendor": "Generic",
"filament_color": "#FFFFFF",
"filament_material": "PLA",
"filament_material_settings_id": "",
"filament_settings_id": "",
"filament_abrasive": 0,
"filament_hybrid": 0,
"filament_compatible_printers": "",
"filament_compatible_printers_condition": "",
"filament_type": "PLA",
"filament_density": 1.24,
"filament_cost": 20,
"filament_weight": 1000,
"filament_spool_weight": 0,
"filament_diameter": 1.75,
"filament_max_volumetric_speed": 23.0,
"filament_flow_ratio": 0.98,
"filament_max_speed": 0,
"filament_minimal_purge_on_wipe_tower": 15,
"filament_pressure_advance": 0.022,
"filament_is_support": 0,
"filament_soluble": 0,
"filament_dissolve_interval": 0,
"filament_abrasive": 0,
"filament_hybrid": 0,
"filament_vendor": "Generic",
"filament_color": "#FFFFFF",
"filament_material": "PLA"
}
}

261
orca-profiles/Neptune4Plus-Bambu/process_bambu.json Normal file
View file

@ -0,0 +1,261 @@
{
"name": "Neptune4Plus-Bambu",
"instantiation": "2026-03-12",
"note": "Process Profile for Elegoo Neptune 4 Plus with BAMBU LAB Hotend (23 mm³/s max flow, steel nozzle)",
"print_settings": {
"max_volumetric_speed": 23.0,
"max_volumetric_extrusion_rate_slope": 4.5,
"retract_length": 1.8,
"retract_speed": 45,
"retract_before_travel": 1.5,
"retract_restart_extra": 0.0,
"retract_restart_extra_speed": 0,
"retract_lift": 0.0,
"retract_lift_enforce": "all_surfaces",
"retract_lift_above": 0,
"retract_lift_below": 0,
"wipe_distance": 3.0,
"wipe_speed": 45,
"z_hop": 0.4,
"z_hop_types": "normal",
"z_hop_threshold": 1.0,
"travel_speed": 400,
"infill_speed": 200,
"internal_solid_infill_speed": 150,
"top_surface_speed": 100,
"external_perimeter_speed": 100,
"perimeter_speed": 130,
"bridge_speed": 40,
"gap_fill_speed": 60,
"small_perimeter_speed": 50,
"default_acceleration": 3000,
"travel_acceleration": 3000,
"first_layer_acceleration": 500,
"infill_acceleration": 2500,
"perimeter_acceleration": 2000,
"bridge_acceleration": 600,
"initial_fan_speed": 100,
"max_fan_speed": 100,
"min_fan_speed": 100,
"bridge_fan_speed": 100,
"overhang_fan_speed": 100,
"fan_always_on": 1,
"cooling_threshold": 5,
"min_print_speed": 15,
"slowdown_for_layer_cooling": 1,
"pressure_advance": 0.022,
"pressure_advance_smooth_time": 0.02,
"layer_height": 0.2,
"first_layer_height": 0.2,
"line_width": 0.42,
"perimeter_line_width": 0.42,
"infill_line_width": 0.42,
"skirt_line_width": 0.42,
"support_line_width": 0.42,
"brim_line_width": 0.42,
"perimeters": 3,
"top_surface_layers": 3,
"bottom_surface_layers": 3,
"infill_density": 20,
"infill_pattern": "gyroid",
"top_infill_pattern": "monotonicline",
"bottom_infill_pattern": "monotonicline",
"detect_overhang_wall": 1,
"detect_thin_wall": 1,
"wall_generator": "classic",
"seam_position": "aligned",
"seam_angle": 45,
"support_type": "normal(auto)",
"support_style": "default",
"support_on_build_plate_only": 0,
"support_threshold": 30,
"support_top_distance": 0.2,
"support_bottom_distance": 0.2,
"support_interface_pattern": "auto",
"support_interface_top_layers": 0,
"support_interface_bottom_layers": 0,
"support_interface_spacing": 0.5,
"brim_type": "outer_brim",
"brim_width": 5,
"brim_ears_detection_length": 3,
"brim_ears_max_angle": 30,
"skirt_distance": 2,
"skirt_height": 1,
"min_skirt_length": 0,
"adaptive_layer_height": 0,
"initial_layer_print_height": 0.2,
"initial_layer_line_width": 0.42,
"reduce_crossing_wall": 0,
"avoid_crossing_perimeter_max_gap": 0,
"avoid_crossing_curved_max_gap": 0,
"infill_direction": 45,
"infill_combination": 0,
"infill_combination_max_layer_height": 0,
"infill_wall_overlap": 15,
"top_infill_wall_overlap": 15,
"bottom_infill_wall_overlap": 15,
"fuzzy_skin": "none",
"fuzzy_skin_thickness": 0.3,
"fuzzy_skin_outside": 0,
"fuzzy_skin_point_dist": 0.8,
"fuzzy_skin_first_layer": 0,
"elefant_foot_compensation": 0.15,
"hole_to_polyhole": 0,
"hole_to_polyhole_threshold": 0.2,
"hole_to_polyhole_angle": 25,
"max_travel_detour_distance": 0,
"reduce_infill_retraction": 1,
"infill_anchor": 1,
"infill_anchor_max": 5,
"raft_layers": 0,
"raft_expansion": 0,
"first_layer_density": 100,
"raft_fan_speed": 100,
"complete_objects": 0,
"objects_grouped_in_pairs": 0,
"ensure_vertical_shell_thickness": "all",
"external_perimeter_extrusion_width": 0,
"perimeter_extrusion_width": 0,
"infill_extrusion_width": 0,
"top_infill_extrusion_width": 0,
"bottom_infill_extrusion_width": 0,
"support_extrusion_width": 0,
"support_interface_extrusion_width": 0,
"brim_width": 5,
"bridge_flow": 1.0,
"bridge_speed": 40,
"bridge_acceleration": 600,
"bridge_no_support": 0,
"top_surface_pattern": "monotonicline",
"bottom_surface_pattern": "monotonicline",
"internal_solid_infill_pattern": "monotonicline",
"spiral_vase": 0,
"only_one_wall_top": 1,
"wall_loops": 1,
"wall_sequence": "inner/outer",
"xy_hole_compensation": 0,
"xy_contour_compensation": 0,
"no_support_on_build_plate_only": 0,
"support_object_max_distance": 10,
"reduce_crossing_wall_count": 0,
"reduce_crossing_wall_threshold": 0,
"infill_inwards": 1,
"infill_not_top": 0,
"infill_not_bottom": 0,
"top_fill_pattern": "monotonicline",
"bottom_fill_pattern": "monotonicline",
"sparse_infill_density": 20,
"sparse_infill_pattern": "gyroid",
"internal_solid_infill_density": 100,
"internal_solid_infill_pattern": "monotonicline",
"top_fill_density": 100,
"bottom_fill_density": 100,
"ironing": 0,
"ironing_type": "top",
"ironing_flow": 10,
"ironing_spacing": 0.15,
"ironing_speed": 20,
"ironing_inset": 0.3,
"ironing_pattern": "zigzag",
"fuzzy_skin_thickness": 0.3,
"fuzzy_skin_point_distance": 0.8,
"max_print_speed": 300,
"standby_temperature_delta": -5,
"temperature_slope": 0,
"enable_support_cooling": 0,
"support_cooling_threshold": 5,
"travel_avoid_other_parts": 1,
"travel_avoid_supports": 0,
"travel_avoid_distance": 0.5,
"overhang_speed_classic": 1,
"overhang_speed_scale": 50,
"overhang_acceleration_scale": 50,
"small_perimeter_speed_min_length": 1,
"bridge_has_support": 0,
"bridge_no_support": 0,
"support_critical_angle": 30,
"support_top_z_distance": 0.2,
"support_bottom_z_distance": 0.2,
"support_xy_distance": 0.4,
"support_xy_distance_overhang": 0.2,
"support_wall_count": 0,
"support_top_interface_layers": 0,
"support_bottom_interface_layers": 0,
"support_interface_loop_pattern": 0,
"support_merge_interlocking_face": 1,
"support_tree_style": "organic",
"support_tree_angle": 45,
"support_tree_branch_diameter": 2,
"support_tree_branch_diameter_angle": 5,
"support_tree_branch_diameter_double_wall": 1,
"support_tree_top_rate": 30,
"skirt_start_from": 0,
"prime_volume": 0,
"prime_speed": 0,
"wipe_tower_x": 0,
"wipe_tower_y": 0,
"wipe_tower_width": 50,
"wipe_tower_bridging": 10,
"wipe_tower_rotation_angle": 0,
"wipe_tower_no_sparse_layers": 0,
"extra_perimeters": 0,
"extra_perimeters_on_overhangs": 0,
"extra_perimeters_under_overhang": 0,
"fill_gap": 0,
"thick_bridges": 0,
"avoid_crossing_perimeter": 0,
"slowdown_for_layer_cooling": 1,
"min_layer_time": 5,
"use_volumetric_rate": 0,
"compatible_printers": ["Elegoo Neptune 4 Plus"],
"compatible_printers_condition": ""
}
}

156
orca-profiles/Neptune4Plus-Original/filament_pla_original.json Normal file
View file

@ -0,0 +1,156 @@
{
"name": "PLA - Original",
"instantiation": "2026-03-12",
"note": "PLA Filament Profile for ORIGINAL Elegoo Hotend (15 mm³/s)",
"type": "filament",
"filament_settings": {
"filament_type": "PLA",
"filament_density": 1.24,
"filament_cost": 20,
"filament_weight": 1000,
"filament_spool_weight": 0,
"filament_diameter": 1.75,
"filament_max_volumetric_speed": 15.0,
"nozzle_temperature": 205,
"nozzle_temperature_initial_layer": 210,
"nozzle_temperature_reduction": 0,
"nozzle_temperature_reduction_initial_layer": 0,
"reduce_initial_layer_print_speed": 0,
"initial_layer_print_speed": 50,
"temperature_change_window": 3,
"bed_temperature": 60,
"bed_temperature_initial_layer": 65,
"bed_temperature_initial_layer_reduction": 0,
"cool_plate_temp": 60,
"cool_plate_temp_initial_layer": 65,
"textured_plate_temp": 65,
"textured_plate_temp_initial_layer": 70,
"hot_plate_temp": 80,
"hot_plate_temp_initial_layer": 85,
"filament_retraction_minimum_travel": 2.0,
"filament_deretraction_speed": 35,
"filament_toolchange_delay": 0,
"filament_cooling_final_temperature": 140,
"filament_cooling_initial_temperature": 210,
"filament_cooling_zone_pause": 0,
"filament_cooling_zone_fan": 100,
"filament_cooling_zone_fan_pause": 0,
"filament_wipe_temperature": null,
"filament_wipe_pause": 0,
"filament_wipe_speed": 35,
"filament_park_position": 0,
"filament_park_speed": 35,
"filament_load_speed": 35,
"filament_unload_speed": 35,
"filament_ramming_volume": 0,
"filament_ramming_volume_external": 0,
"filament_ramming_flow": 1,
"filament_ramming_acceleration": 9000,
"filament_deretraction_extra_length": 0,
"filament_deretraction_extra_speed": 0,
"filament_retract_before_wipe": 0,
"filament_wipe_before_retract": 0,
"filament_retract_restart_extra": 0,
"filament_retract_restart_extra_speed": 0,
"filament_retract_lift": 0,
"filament_retract_lift_enforce": "all_surfaces",
"filament_retract_lift_above": 0,
"filament_retract_lift_below": 0,
"filament_retract_when_changing_layer": 1,
"filament_retract_on_stop": 0,
"filament_retract_speed": 35,
"filament_retract_length": 2.5,
"filament_z_hop": 0,
"filament_z_hop_types": "normal",
"filament_z_hop_threshold": 1.0,
"compatible_printers": ["Elegoo Neptune 4 Plus"],
"compatible_printers_condition": "hotend == \"original\"",
"filament_start_gcode": "; Filament Start - Original Hotend\nM117 Printing PLA...\n",
"filament_end_gcode": "; Filament End - Original Hotend\n",
"filament_cost_update_behavior": "use_average",
"filament_weight_update_behavior": "use_average",
"filament_is_support": 0,
"filament_soluble": 0,
"filament_dissolve_interval": 0,
"filament_flow_ratio": 0.98,
"filament_max_speed": 0,
"filament_minimal_purge_on_wipe_tower": 15,
"filament_pressure_advance": 0.027,
"filament_retraction_extra_length": 0,
"filament_retraction_minimum_travel": 2.0,
"filament_retract_restart_extra": 0,
"filament_retract_restart_extra_speed": 0,
"filament_deretraction_extra_length": 0,
"filament_deretraction_extra_speed": 0,
"filament_retract_lift": 0,
"filament_retract_lift_enforce": "all_surfaces",
"filament_retract_lift_above": 0,
"filament_retract_lift_below": 0,
"filament_retract_when_changing_layer": 1,
"filament_retract_on_stop": 0,
"filament_retract_speed": 35,
"filament_retract_length": 2.5,
"filament_z_hop": 0,
"filament_z_hop_types": "normal",
"filament_z_hop_threshold": 1.0,
"filament_ramming_volume": 0,
"filament_ramming_volume_external": 0,
"filament_ramming_flow": 1,
"filament_ramming_acceleration": 9000,
"filament_wipe_temperature": null,
"filament_wipe_pause": 0,
"filament_wipe_speed": 35,
"filament_park_position": 0,
"filament_park_speed": 35,
"filament_load_speed": 35,
"filament_unload_speed": 35,
"filament_cooling_final_temperature": 140,
"filament_cooling_initial_temperature": 210,
"filament_cooling_zone_pause": 0,
"filament_cooling_zone_fan": 100,
"filament_cooling_zone_fan_pause": 0,
"filament_toolchange_delay": 0,
"filament_deretraction_speed": 35,
"filament_retract_before_wipe": 0,
"filament_wipe_before_retract": 0,
"filament_vendor": "Generic",
"filament_color": "#FFFFFF",
"filament_material": "PLA",
"filament_material_settings_id": "",
"filament_settings_id": "",
"filament_abrasive": 0,
"filament_hybrid": 0,
"filament_compatible_printers": "",
"filament_compatible_printers_condition": "",
"filament_type": "PLA",
"filament_density": 1.24,
"filament_cost": 20,
"filament_weight": 1000,
"filament_spool_weight": 0,
"filament_diameter": 1.75,
"filament_max_volumetric_speed": 15.0,
"filament_flow_ratio": 0.98,
"filament_max_speed": 0,
"filament_minimal_purge_on_wipe_tower": 15,
"filament_pressure_advance": 0.027,
"filament_is_support": 0,
"filament_soluble": 0,
"filament_dissolve_interval": 0,
"filament_abrasive": 0,
"filament_hybrid": 0,
"filament_vendor": "Generic",
"filament_color": "#FFFFFF",
"filament_material": "PLA"
}
}

261
orca-profiles/Neptune4Plus-Original/process_original.json Normal file
View file

@ -0,0 +1,261 @@
{
"name": "Neptune4Plus-Original",
"instantiation": "2026-03-12",
"note": "Process Profile for Elegoo Neptune 4 Plus with ORIGINAL Hotend (15 mm³/s max flow)",
"print_settings": {
"max_volumetric_speed": 15.0,
"max_volumetric_extrusion_rate_slope": 3.0,
"retract_length": 2.5,
"retract_speed": 35,
"retract_before_travel": 2.0,
"retract_restart_extra": 0.0,
"retract_restart_extra_speed": 0,
"retract_lift": 0.0,
"retract_lift_enforce": "all_surfaces",
"retract_lift_above": 0,
"retract_lift_below": 0,
"wipe_distance": 4.0,
"wipe_speed": 35,
"z_hop": 0.4,
"z_hop_types": "normal",
"z_hop_threshold": 1.0,
"travel_speed": 350,
"infill_speed": 150,
"internal_solid_infill_speed": 100,
"top_surface_speed": 80,
"external_perimeter_speed": 80,
"perimeter_speed": 100,
"bridge_speed": 30,
"gap_fill_speed": 50,
"small_perimeter_speed": 40,
"default_acceleration": 3000,
"travel_acceleration": 3000,
"first_layer_acceleration": 500,
"infill_acceleration": 2000,
"perimeter_acceleration": 1500,
"bridge_acceleration": 500,
"initial_fan_speed": 100,
"max_fan_speed": 100,
"min_fan_speed": 100,
"bridge_fan_speed": 100,
"overhang_fan_speed": 100,
"fan_always_on": 1,
"cooling_threshold": 5,
"min_print_speed": 15,
"slowdown_for_layer_cooling": 1,
"pressure_advance": 0.027,
"pressure_advance_smooth_time": 0.02,
"layer_height": 0.2,
"first_layer_height": 0.2,
"line_width": 0.42,
"perimeter_line_width": 0.42,
"infill_line_width": 0.42,
"skirt_line_width": 0.42,
"support_line_width": 0.42,
"brim_line_width": 0.42,
"perimeters": 3,
"top_surface_layers": 3,
"bottom_surface_layers": 3,
"infill_density": 20,
"infill_pattern": "gyroid",
"top_infill_pattern": "monotonicline",
"bottom_infill_pattern": "monotonicline",
"detect_overhang_wall": 1,
"detect_thin_wall": 1,
"wall_generator": "classic",
"seam_position": "aligned",
"seam_angle": 45,
"support_type": "normal(auto)",
"support_style": "default",
"support_on_build_plate_only": 0,
"support_threshold": 30,
"support_top_distance": 0.2,
"support_bottom_distance": 0.2,
"support_interface_pattern": "auto",
"support_interface_top_layers": 0,
"support_interface_bottom_layers": 0,
"support_interface_spacing": 0.5,
"brim_type": "outer_brim",
"brim_width": 5,
"brim_ears_detection_length": 3,
"brim_ears_max_angle": 30,
"skirt_distance": 2,
"skirt_height": 1,
"min_skirt_length": 0,
"adaptive_layer_height": 0,
"initial_layer_print_height": 0.2,
"initial_layer_line_width": 0.42,
"reduce_crossing_wall": 0,
"avoid_crossing_perimeter_max_gap": 0,
"avoid_crossing_curved_max_gap": 0,
"infill_direction": 45,
"infill_combination": 0,
"infill_combination_max_layer_height": 0,
"infill_wall_overlap": 15,
"top_infill_wall_overlap": 15,
"bottom_infill_wall_overlap": 15,
"fuzzy_skin": "none",
"fuzzy_skin_thickness": 0.3,
"fuzzy_skin_outside": 0,
"fuzzy_skin_point_dist": 0.8,
"fuzzy_skin_first_layer": 0,
"elefant_foot_compensation": 0.15,
"hole_to_polyhole": 0,
"hole_to_polyhole_threshold": 0.2,
"hole_to_polyhole_angle": 25,
"max_travel_detour_distance": 0,
"reduce_infill_retraction": 1,
"infill_anchor": 1,
"infill_anchor_max": 5,
"raft_layers": 0,
"raft_expansion": 0,
"first_layer_density": 100,
"raft_fan_speed": 100,
"complete_objects": 0,
"objects_grouped_in_pairs": 0,
"ensure_vertical_shell_thickness": "all",
"external_perimeter_extrusion_width": 0,
"perimeter_extrusion_width": 0,
"infill_extrusion_width": 0,
"top_infill_extrusion_width": 0,
"bottom_infill_extrusion_width": 0,
"support_extrusion_width": 0,
"support_interface_extrusion_width": 0,
"brim_width": 5,
"bridge_flow": 1.0,
"bridge_speed": 30,
"bridge_acceleration": 500,
"bridge_no_support": 0,
"top_surface_pattern": "monotonicline",
"bottom_surface_pattern": "monotonicline",
"internal_solid_infill_pattern": "monotonicline",
"spiral_vase": 0,
"only_one_wall_top": 1,
"wall_loops": 1,
"wall_sequence": "inner/outer",
"xy_hole_compensation": 0,
"xy_contour_compensation": 0,
"no_support_on_build_plate_only": 0,
"support_object_max_distance": 10,
"reduce_crossing_wall_count": 0,
"reduce_crossing_wall_threshold": 0,
"infill_inwards": 1,
"infill_not_top": 0,
"infill_not_bottom": 0,
"top_fill_pattern": "monotonicline",
"bottom_fill_pattern": "monotonicline",
"sparse_infill_density": 20,
"sparse_infill_pattern": "gyroid",
"internal_solid_infill_density": 100,
"internal_solid_infill_pattern": "monotonicline",
"top_fill_density": 100,
"bottom_fill_density": 100,
"ironing": 0,
"ironing_type": "top",
"ironing_flow": 10,
"ironing_spacing": 0.15,
"ironing_speed": 20,
"ironing_inset": 0.3,
"ironing_pattern": "zigzag",
"fuzzy_skin_thickness": 0.3,
"fuzzy_skin_point_distance": 0.8,
"max_print_speed": 250,
"standby_temperature_delta": -5,
"temperature_slope": 0,
"enable_support_cooling": 0,
"support_cooling_threshold": 5,
"travel_avoid_other_parts": 1,
"travel_avoid_supports": 0,
"travel_avoid_distance": 0.5,
"overhang_speed_classic": 1,
"overhang_speed_scale": 50,
"overhang_acceleration_scale": 50,
"small_perimeter_speed_min_length": 1,
"bridge_has_support": 0,
"bridge_no_support": 0,
"support_critical_angle": 30,
"support_top_z_distance": 0.2,
"support_bottom_z_distance": 0.2,
"support_xy_distance": 0.4,
"support_xy_distance_overhang": 0.2,
"support_wall_count": 0,
"support_top_interface_layers": 0,
"support_bottom_interface_layers": 0,
"support_interface_loop_pattern": 0,
"support_merge_interlocking_face": 1,
"support_tree_style": "organic",
"support_tree_angle": 45,
"support_tree_branch_diameter": 2,
"support_tree_branch_diameter_angle": 5,
"support_tree_branch_diameter_double_wall": 1,
"support_tree_top_rate": 30,
"skirt_start_from": 0,
"prime_volume": 0,
"prime_speed": 0,
"wipe_tower_x": 0,
"wipe_tower_y": 0,
"wipe_tower_width": 50,
"wipe_tower_bridging": 10,
"wipe_tower_rotation_angle": 0,
"wipe_tower_no_sparse_layers": 0,
"extra_perimeters": 0,
"extra_perimeters_on_overhangs": 0,
"extra_perimeters_under_overhang": 0,
"fill_gap": 0,
"thick_bridges": 0,
"avoid_crossing_perimeter": 0,
"slowdown_for_layer_cooling": 1,
"min_layer_time": 5,
"use_volumetric_rate": 0,
"compatible_printers": ["Elegoo Neptune 4 Plus"],
"compatible_printers_condition": ""
}
}

166
orca-profiles/README.md Normal file
View file

@ -0,0 +1,166 @@
# 🎯 Orca Slicer Profiles - Neptune 4 Plus Dual Hotend
## 📁 Profil-Struktur
```
orca-profiles/
├── Neptune4Plus-Original/ # Elegoo Original Hotend (15 mm³/s)
│ ├── process_original.json
│ ├── filament_pla_original.json
│ ├── filament_petg_original.json (TODO)
│ ├── filament_abs_original.json (TODO)
│ └── filament_tpu_original.json (TODO)
└── Neptune4Plus-Bambu/ # Bambu Lab Hotend (23 mm³/s, Steel Nozzle)
├── process_bambu.json
├── filament_pla_bambu.json
├── filament_petg_bambu.json (TODO)
├── filament_abs_bambu.json (TODO)
├── filament_tpu_bambu.json (TODO)
└── filament_carbon_bambu.json (TODO - nur Bambu!)
```
## 🔧 Hauptunterschiede
| Setting | Original | Bambu | Warum? |
|---------|----------|-------|--------|
| **Max Volumetric Speed** | 15 mm³/s | 23 mm³/s | Bambu Hotend kann mehr Flow |
| **Retract Length** | 2.5mm | 1.8mm | Bambu hat kürzere Heatbreak |
| **Retract Speed** | 35 mm/s | 45 mm/s | Bambu verträgt schnelleres Retract |
| **Nozzle Temp (PLA)** | 205°C | 210°C | Stahl leitet Wärme schlechter |
| **Pressure Advance** | 0.027 | 0.022 | Bambu Hotend braucht weniger PA |
| **Travel Speed** | 350 mm/s | 400 mm/s | Bambu ermöglicht schneller |
| **Perimeter Speed** | 100 mm/s | 130 mm/s | Höherer Flow erlaubt schnellere Perimeter |
| **Infill Speed** | 150 mm/s | 200 mm/s | Bambu Hotend kann mehr |
## 📋 Installation in Orca Slicer
### Option A: Import über GUI
1. Orca Slicer öffnen
2. File → Import → Import Config(s)...
3. JSON-Files auswählen
4. Profiles erscheinen in den Dropdowns
### Option B: Manuell kopieren
```bash
# Linux
cp orca-profiles/Neptune4Plus-Original/* ~/.config/OrcaSlicer/profiles/
cp orca-profiles/Neptune4Plus-Bambu/* ~/.config/OrcaSlicer/profiles/
# Windows
# Kopiere nach: %APPDATA%\OrcaSlicer\profiles\
# macOS
# Kopiere nach: ~/Library/Application Support/OrcaSlicer/profiles/
```
### Option C: Presets Ordner
1. Orca Slicer → Settings → Preferences
2. "Open Preset Folder" klicken
3. JSON-Files dort rein kopieren
4. Orca neu starten
## 🔨 Drucktests empfohlen
### 1. **Temperature Tower** (für jedes Hotend + Filament)
- Teste: 195°C, 200°C, 205°C, 210°C, 215°C
- Bambu-Hotend braucht evtl. +5°C wegen Stahl-Nozzle
### 2. **Retraction Test**
- Teste: 1.5mm, 1.8mm, 2.0mm, 2.5mm
- Original: Start bei 2.5mm
- Bambu: Start bei 1.8mm
### 3. **Pressure Advance Calibration**
```bash
# Klipper Console
PRESSURE_ADVANCE_CALIBRATE
# Oder Testdruck: https://github.com/TeachingTech3D/Calibration
```
- Original: Start bei 0.027
- Bambu: Start bei 0.022
### 4. **Max Flow Rate Test**
- Drucke einen Würfel mit 100% Infill
- Erhöhe schrittweise die Geschwindigkeit
- Beobachte Underextrusion
## 🎯 Filament-spezifische Hinweise
### PLA
- **Original:** 205°C, 15 mm³/s, 2.5mm Retract
- **Bambu:** 210°C, 23 mm³/s, 1.8mm Retract
### PETG
- **Original:** 240°C, 12 mm³/s, 2.5mm Retract
- **Bambu:** 245°C, 18 mm³/s, 1.8mm Retract
- ⚠️ PETG mag keine zu kurzen Retracts (oozing!)
### ABS
- **Original:** 250°C, 12 mm³/s, 2.5mm Retract
- **Bambu:** 255°C, 18 mm³/s, 1.8mm Retract
- 🔥 Enclosure empfohlen!
### TPU (Flex)
- **Original:** 225°C, 8 mm³/s, 1.5mm Retract
- **Bambu:** 230°C, 10 mm³/s, 1.2mm Retract
- ⚠️ TPU braucht LANGSAME Retracts!
### Carbon/Glow (NUR Bambu!)
- **Bambu:** 215-225°C, 15 mm³/s, 1.8mm Retract
- ⚠️ **NIEMALS** im Original-Hotend (zerstört Messing-Nozzle!)
- Stahl-Nozzle ist abrasionsfest
## 📊 PRINT_START Macro Anpassung
Für beide Hotends kannst du das gleiche `PRINT_START_NOCCI` verwenden, aber:
### In Slicer Start-Gcode:
```gcode
; Für Original Hotend
PRINT_START_NOCCI EXTRUDER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature] FILAMENT_TYPE=PLA
; Für Bambu Hotend
PRINT_START_NOCCI EXTRUDER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature] FILAMENT_TYPE=PLA
```
### Optional: Zwei verschiedene Macros
Du könntest auch zwei Macros machen:
- `PRINT_START_ORIGINAL` → konservativer
- `PRINT_START_BAMBU` → aggressiver (höhere Temps, schneller)
## 🔍 Troubleshooting
| Problem | Original | Bambu |
|---------|----------|-------|
| **Underextrusion** | Flow zu hoch (>15) | Temp zu niedrig |
| **Stringing** | Retract erhöhen | Temp reduzieren |
| **Heat Creep** | Lüfter prüfen | Temp reduzieren, Retract kürzen |
| **Poor Layer Adhesion** | Temp erhöhen | Temp weiter erhöhen (+10°C) |
| **Clogging** | Hotend reinigen | Heatbreak tauschen |
## 📝 TODO - Fehlende Profile
Folgende Filament-Profile sollten noch erstellt werden:
- [ ] PETG - Original
- [ ] PETG - Bambu
- [ ] ABS - Original
- [ ] ABS - Bambu
- [ ] TPU - Original
- [ ] TPU - Bambu
- [ ] Carbon/ASA - Bambu (nur Bambu!)
## 💡 Tipps
1. **Immer Backup** der aktuellen Profiles vor Änderungen
2. **Temperature Tower** für jedes neue Filament drucken
3. **Pressure Advance** bei Hotend-Wechsel neu kalibrieren!
4. **Flow Rate** realistisch setzen (lieber konservativ)
5. **Notizen machen** welche Settings für welches Filament funktionieren
---
**Created:** 2026-03-12
**Printer:** Elegoo Neptune 4 Plus
**Hotends:** Original (15 mm³/s) + Bambu Lab (23 mm³/s)
**Slicer:** Orca Slicer
**Firmware:** Open4Neptune + Klipper + Cartographer 3D