{
  "name": "PLA - Original",
  "instantiation": "2026-03-12",
  "note": "PLA Filament Profile for ORIGINAL Elegoo Hotend (15 mm³/s)",
  "type": "filament",
  
  "filament_settings": {
    "filament_type": "PLA",
    "filament_density": 1.24,
    "filament_cost": 20,
    "filament_weight": 1000,
    "filament_spool_weight": 0,
    "filament_diameter": 1.75,
    "filament_max_volumetric_speed": 15.0,
    
    "nozzle_temperature": 205,
    "nozzle_temperature_initial_layer": 210,
    "nozzle_temperature_reduction": 0,
    "nozzle_temperature_reduction_initial_layer": 0,
    "reduce_initial_layer_print_speed": 0,
    "initial_layer_print_speed": 50,
    
    "temperature_change_window": 3,
    
    "bed_temperature": 60,
    "bed_temperature_initial_layer": 65,
    "bed_temperature_initial_layer_reduction": 0,
    
    "cool_plate_temp": 60,
    "cool_plate_temp_initial_layer": 65,
    "textured_plate_temp": 65,
    "textured_plate_temp_initial_layer": 70,
    "hot_plate_temp": 80,
    "hot_plate_temp_initial_layer": 85,
    
    "filament_retraction_minimum_travel": 2.0,
    "filament_deretraction_speed": 35,
    "filament_toolchange_delay": 0,
    "filament_cooling_final_temperature": 140,
    "filament_cooling_initial_temperature": 210,
    "filament_cooling_zone_pause": 0,
    "filament_cooling_zone_fan": 100,
    "filament_cooling_zone_fan_pause": 0,
    "filament_wipe_temperature": null,
    "filament_wipe_pause": 0,
    "filament_wipe_speed": 35,
    "filament_park_position": 0,
    "filament_park_speed": 35,
    "filament_load_speed": 35,
    "filament_unload_speed": 35,
    "filament_ramming_volume": 0,
    "filament_ramming_volume_external": 0,
    "filament_ramming_flow": 1,
    "filament_ramming_acceleration": 9000,
    "filament_deretraction_extra_length": 0,
    "filament_deretraction_extra_speed": 0,
    "filament_retract_before_wipe": 0,
    "filament_wipe_before_retract": 0,
    "filament_retract_restart_extra": 0,
    "filament_retract_restart_extra_speed": 0,
    "filament_retract_lift": 0,
    "filament_retract_lift_enforce": "all_surfaces",
    "filament_retract_lift_above": 0,
    "filament_retract_lift_below": 0,
    "filament_retract_when_changing_layer": 1,
    "filament_retract_on_stop": 0,
    "filament_retract_speed": 35,
    "filament_retract_length": 2.5,
    "filament_z_hop": 0,
    "filament_z_hop_types": "normal",
    "filament_z_hop_threshold": 1.0,
    
    "compatible_printers": ["Elegoo Neptune 4 Plus"],
    "compatible_printers_condition": "hotend == \"original\"",
    
    "filament_start_gcode": "; Filament Start - Original Hotend\nM117 Printing PLA...\n",
    "filament_end_gcode": "; Filament End - Original Hotend\n",
    
    "filament_cost_update_behavior": "use_average",
    "filament_weight_update_behavior": "use_average",
    
    "filament_is_support": 0,
    "filament_soluble": 0,
    "filament_dissolve_interval": 0,
    "filament_flow_ratio": 0.98,
    "filament_max_speed": 0,
    "filament_minimal_purge_on_wipe_tower": 15,
    "filament_pressure_advance": 0.050,
    "filament_retraction_extra_length": 0,
    "filament_retraction_minimum_travel": 2.0,
    "filament_retract_restart_extra": 0,
    "filament_retract_restart_extra_speed": 0,
    "filament_deretraction_extra_length": 0,
    "filament_deretraction_extra_speed": 0,
    "filament_retract_lift": 0,
    "filament_retract_lift_enforce": "all_surfaces",
    "filament_retract_lift_above": 0,
    "filament_retract_lift_below": 0,
    "filament_retract_when_changing_layer": 1,
    "filament_retract_on_stop": 0,
    "filament_retract_speed": 35,
    "filament_retract_length": 2.5,
    "filament_z_hop": 0,
    "filament_z_hop_types": "normal",
    "filament_z_hop_threshold": 1.0,
    "filament_ramming_volume": 0,
    "filament_ramming_volume_external": 0,
    "filament_ramming_flow": 1,
    "filament_ramming_acceleration": 9000,
    "filament_wipe_temperature": null,
    "filament_wipe_pause": 0,
    "filament_wipe_speed": 35,
    "filament_park_position": 0,
    "filament_park_speed": 35,
    "filament_load_speed": 35,
    "filament_unload_speed": 35,
    "filament_cooling_final_temperature": 140,
    "filament_cooling_initial_temperature": 210,
    "filament_cooling_zone_pause": 0,
    "filament_cooling_zone_fan": 100,
    "filament_cooling_zone_fan_pause": 0,
    "filament_toolchange_delay": 0,
    "filament_deretraction_speed": 35,
    "filament_retract_before_wipe": 0,
    "filament_wipe_before_retract": 0,
    
    "filament_vendor": "Generic",
    "filament_color": "#FFFFFF",
    "filament_material": "PLA",
    "filament_material_settings_id": "",
    "filament_settings_id": "",
    "filament_abrasive": 0,
    "filament_hybrid": 0,
    "filament_compatible_printers": "",
    "filament_compatible_printers_condition": "",
    "filament_type": "PLA",
    "filament_density": 1.24,
    "filament_cost": 20,
    "filament_weight": 1000,
    "filament_spool_weight": 0,
    "filament_diameter": 1.75,
    "filament_max_volumetric_speed": 15.0,
    "filament_flow_ratio": 0.98,
    "filament_max_speed": 0,
    "filament_minimal_purge_on_wipe_tower": 15,
    "filament_pressure_advance": 0.050,
    "filament_is_support": 0,
    "filament_soluble": 0,
    "filament_dissolve_interval": 0,
    "filament_abrasive": 0,
    "filament_hybrid": 0,
    "filament_vendor": "Generic",
    "filament_color": "#FFFFFF",
    "filament_material": "PLA"
  }
}