#############################################################################
#   NOZZLE CLEAN SETTINGS - Neptune 4 Plus
#############################################################################
# Original: https://github.com/Open-Elegoo-Community/klipper-nozzle-clean-macro
# Adapted for Neptune 4 Plus with corner wiper holder
#############################################################################

[include KNCM/nozzle_clean.cfg]

[gcode_macro _KNCM_SETTINGS]
description: "Nozzle cleaning settings for Neptune 4 Plus"

# ------------------------------------------------------------------------
# BASIC CLEANING CONFIGURATION
# ------------------------------------------------------------------------

# Set nozzle height for cleaning at the brush
# IMPORTANT: Calibrate this value! Start high (35) and work down
variable_cleaning_height: 30

# Specifies the axis that will move during wiping (X or Y)
# Y = Bed moves (Neptune 4), X = Nozzle moves (most CoreXY)
variable_wiping_axis: 'Y'

# Set maximum Y value of the usable bed area (not the nozzle max travel)
# N4=229, N4Plus=330, N4Max=430
variable_printer_bed_y_max: 330

# Number of times the cleaning motions are executed
# 1 loop = 3 passes (first, second, third)
variable_cleaning_loops: 1

# Disable (0) / Enable (1) PurgeShake motion before cleaning
variable_purge_shake: 1

# Disable (0) / Enable (1) Wait for nozzle temp restore
variable_wait_nozzle_temp_restore: 1

# Disable (0) / Enable (1) debug messages in console
variable_debug: 0

# ------------------------------------------------------------------------
# ACCELERATION (in mm/s²) & SPEED SETTINGS (in mm/s)
# ------------------------------------------------------------------------
# Acceleration (0 = use printer default)
variable_acceleration: 0

# Travel speed (fast non-cleaning moves)
variable_travel_speed: 350

# Speed for slow cleaning moves
variable_slow_speed: 250

# Speed for fast cleaning moves
variable_fast_speed: 500

# ------------------------------------------------------------------------
# FILAMENT CLEANING TEMPERATURES
# ------------------------------------------------------------------------
# Cleaning temperatures by filament type (cooler than print temp)
variable_cleaning_temperatures: {
  "PLA":140,
  "PETG":160,
  "TPU":180,
  "ABS":190,
  "ASA":190
}

# ------------------------------------------------------------------------
# WIPER SETUP (brush geometry and offsets) - NEPTUNE 4 PLUS SPECIFIC
# ------------------------------------------------------------------------

# Wiper width (X-axis space used by the brush)
variable_wiper_width: 8

# Wiper length (Y-axis space used by the brush)
variable_wiper_length: 37

# Thickness of the wiper holder wall (distance from bed to silicone)
variable_wiper_walloffset: 0

# Distance from bed origin (X=0) to start of silicone brush area
# Neptune 4 Plus: Wiper is in corner, measure from X=0 to brush start
variable_bed_corner_to_wiper_offset: 40.5

# Number of sinusoidal waves during cleaning motion
variable_waves: 2

# ------------------------------------------------------------------------
# !!! DO NOT EDIT BELOW !!!
# ------------------------------------------------------------------------
gcode:
  ; This macro only stores shared variables, no actual commands
  {action_respond_info("Running KNCM_SETTINGS does nothing - it stores settings only")}