1cf9620736
Completed filament profiles: - PETG: Original (240°C, 12mm³/s) & Bambu (245°C, 18mm³/s) - ABS: Original (250°C, 12mm³/s) & Bambu (255°C, 18mm³/s) - TPU: Original (225°C, 8mm³/s) & Bambu (230°C, 10mm³/s) - Carbon Fiber: Bambu ONLY (215°C, 15mm³/s, abrasive!) Key settings per material: - PETG: Lower fan (30%), slower retracts to prevent oozing - ABS: No fan, enclosure required, higher temps - TPU: Very slow retracts (20-25mm/s), minimal retraction - Carbon: Abrasive flag set, steel nozzle required All profiles include: - Correct max volumetric speeds - Temperature offsets for steel nozzle (+5°C) - Shorter retracts for Bambu hotend (1.8mm vs 2.5mm) - Appropriate Pressure Advance values - Filament-specific cooling settings
95 lines
3.2 KiB
JSON
95 lines
3.2 KiB
JSON
{
|
|
"name": "PETG - Bambu",
|
|
"instantiation": "2026-03-12",
|
|
"note": "PETG Filament Profile for BAMBU LAB Hotend (23 mm³/s, steel nozzle)",
|
|
"type": "filament",
|
|
|
|
"filament_settings": {
|
|
"filament_type": "PETG",
|
|
"filament_density": 1.27,
|
|
"filament_cost": 25,
|
|
"filament_weight": 1000,
|
|
"filament_spool_weight": 0,
|
|
"filament_diameter": 1.75,
|
|
"filament_max_volumetric_speed": 18.0,
|
|
|
|
"nozzle_temperature": 245,
|
|
"nozzle_temperature_initial_layer": 250,
|
|
"nozzle_temperature_reduction": 0,
|
|
"nozzle_temperature_reduction_initial_layer": 0,
|
|
"reduce_initial_layer_print_speed": 0,
|
|
"initial_layer_print_speed": 40,
|
|
|
|
"temperature_change_window": 3,
|
|
|
|
"bed_temperature": 75,
|
|
"bed_temperature_initial_layer": 80,
|
|
"bed_temperature_initial_layer_reduction": 0,
|
|
|
|
"cool_plate_temp": 75,
|
|
"cool_plate_temp_initial_layer": 80,
|
|
"textured_plate_temp": 80,
|
|
"textured_plate_temp_initial_layer": 85,
|
|
"hot_plate_temp": 85,
|
|
"hot_plate_temp_initial_layer": 90,
|
|
|
|
"filament_retraction_minimum_travel": 1.5,
|
|
"filament_deretraction_speed": 40,
|
|
"filament_toolchange_delay": 0,
|
|
"filament_cooling_final_temperature": 160,
|
|
"filament_cooling_initial_temperature": 250,
|
|
"filament_cooling_zone_pause": 0,
|
|
"filament_cooling_zone_fan": 30,
|
|
"filament_cooling_zone_fan_pause": 0,
|
|
"filament_wipe_temperature": null,
|
|
"filament_wipe_pause": 0,
|
|
"filament_wipe_speed": 40,
|
|
"filament_park_position": 0,
|
|
"filament_park_speed": 40,
|
|
"filament_load_speed": 40,
|
|
"filament_unload_speed": 40,
|
|
"filament_ramming_volume": 0,
|
|
"filament_ramming_volume_external": 0,
|
|
"filament_ramming_flow": 1,
|
|
"filament_ramming_acceleration": 9000,
|
|
"filament_deretraction_extra_length": 0,
|
|
"filament_deretraction_extra_speed": 0,
|
|
"filament_retract_before_wipe": 0,
|
|
"filament_wipe_before_retract": 0,
|
|
"filament_retract_restart_extra": 0,
|
|
"filament_retract_restart_extra_speed": 0,
|
|
"filament_retract_lift": 0,
|
|
"filament_retract_lift_enforce": "all_surfaces",
|
|
"filament_retract_lift_above": 0,
|
|
"filament_retract_lift_below": 0,
|
|
"filament_retract_when_changing_layer": 1,
|
|
"filament_retract_on_stop": 0,
|
|
"filament_retract_speed": 40,
|
|
"filament_retract_length": 1.8,
|
|
"filament_z_hop": 0,
|
|
"filament_z_hop_types": "normal",
|
|
"filament_z_hop_threshold": 1.0,
|
|
|
|
"compatible_printers": ["Elegoo Neptune 4 Plus"],
|
|
"compatible_printers_condition": "hotend == \"bambu\"",
|
|
|
|
"filament_start_gcode": "; Filament Start - Bambu Hotend (Steel Nozzle)\nM117 Printing PETG (Bambu)...\n",
|
|
"filament_end_gcode": "; Filament End - Bambu Hotend\n",
|
|
|
|
"filament_cost_update_behavior": "use_average",
|
|
"filament_weight_update_behavior": "use_average",
|
|
|
|
"filament_is_support": 0,
|
|
"filament_soluble": 0,
|
|
"filament_dissolve_interval": 0,
|
|
"filament_flow_ratio": 0.97,
|
|
"filament_max_speed": 0,
|
|
"filament_minimal_purge_on_wipe_tower": 15,
|
|
"filament_pressure_advance": 0.025,
|
|
"filament_abrasive": 0,
|
|
"filament_hybrid": 0,
|
|
"filament_vendor": "Generic",
|
|
"filament_color": "#FFA500",
|
|
"filament_material": "PETG"
|
|
}
|
|
}
|