2eadac8722
Updated pressure_advance values for all filament profiles based on real calibration tests with Neptune 4 Plus + Bambu Lab Hotend. Bambu Lab Hotend (23 mm³/s, steel nozzle): - PLA: 0.045 (calibrated via PA_TEST_PATTERN) - PETG: 0.070 - ABS: 0.060 - TPU: 0.100 - Carbon-Fiber: 0.040 Original Hotend (15 mm³/s, brass nozzle): - PLA: 0.050 (slightly higher due to bowden-style path) - PETG: 0.075 - ABS: 0.065 - TPU: 0.110 These values are now embedded in the Orca profiles and will be automatically sent to Klipper at print start. Klipper config retains fallback values.
156 lines
5.3 KiB
JSON
156 lines
5.3 KiB
JSON
{
|
|
"name": "PLA - Original",
|
|
"instantiation": "2026-03-12",
|
|
"note": "PLA Filament Profile for ORIGINAL Elegoo Hotend (15 mm³/s)",
|
|
"type": "filament",
|
|
|
|
"filament_settings": {
|
|
"filament_type": "PLA",
|
|
"filament_density": 1.24,
|
|
"filament_cost": 20,
|
|
"filament_weight": 1000,
|
|
"filament_spool_weight": 0,
|
|
"filament_diameter": 1.75,
|
|
"filament_max_volumetric_speed": 15.0,
|
|
|
|
"nozzle_temperature": 205,
|
|
"nozzle_temperature_initial_layer": 210,
|
|
"nozzle_temperature_reduction": 0,
|
|
"nozzle_temperature_reduction_initial_layer": 0,
|
|
"reduce_initial_layer_print_speed": 0,
|
|
"initial_layer_print_speed": 50,
|
|
|
|
"temperature_change_window": 3,
|
|
|
|
"bed_temperature": 60,
|
|
"bed_temperature_initial_layer": 65,
|
|
"bed_temperature_initial_layer_reduction": 0,
|
|
|
|
"cool_plate_temp": 60,
|
|
"cool_plate_temp_initial_layer": 65,
|
|
"textured_plate_temp": 65,
|
|
"textured_plate_temp_initial_layer": 70,
|
|
"hot_plate_temp": 80,
|
|
"hot_plate_temp_initial_layer": 85,
|
|
|
|
"filament_retraction_minimum_travel": 2.0,
|
|
"filament_deretraction_speed": 35,
|
|
"filament_toolchange_delay": 0,
|
|
"filament_cooling_final_temperature": 140,
|
|
"filament_cooling_initial_temperature": 210,
|
|
"filament_cooling_zone_pause": 0,
|
|
"filament_cooling_zone_fan": 100,
|
|
"filament_cooling_zone_fan_pause": 0,
|
|
"filament_wipe_temperature": null,
|
|
"filament_wipe_pause": 0,
|
|
"filament_wipe_speed": 35,
|
|
"filament_park_position": 0,
|
|
"filament_park_speed": 35,
|
|
"filament_load_speed": 35,
|
|
"filament_unload_speed": 35,
|
|
"filament_ramming_volume": 0,
|
|
"filament_ramming_volume_external": 0,
|
|
"filament_ramming_flow": 1,
|
|
"filament_ramming_acceleration": 9000,
|
|
"filament_deretraction_extra_length": 0,
|
|
"filament_deretraction_extra_speed": 0,
|
|
"filament_retract_before_wipe": 0,
|
|
"filament_wipe_before_retract": 0,
|
|
"filament_retract_restart_extra": 0,
|
|
"filament_retract_restart_extra_speed": 0,
|
|
"filament_retract_lift": 0,
|
|
"filament_retract_lift_enforce": "all_surfaces",
|
|
"filament_retract_lift_above": 0,
|
|
"filament_retract_lift_below": 0,
|
|
"filament_retract_when_changing_layer": 1,
|
|
"filament_retract_on_stop": 0,
|
|
"filament_retract_speed": 35,
|
|
"filament_retract_length": 2.5,
|
|
"filament_z_hop": 0,
|
|
"filament_z_hop_types": "normal",
|
|
"filament_z_hop_threshold": 1.0,
|
|
|
|
"compatible_printers": ["Elegoo Neptune 4 Plus"],
|
|
"compatible_printers_condition": "hotend == \"original\"",
|
|
|
|
"filament_start_gcode": "; Filament Start - Original Hotend\nM117 Printing PLA...\n",
|
|
"filament_end_gcode": "; Filament End - Original Hotend\n",
|
|
|
|
"filament_cost_update_behavior": "use_average",
|
|
"filament_weight_update_behavior": "use_average",
|
|
|
|
"filament_is_support": 0,
|
|
"filament_soluble": 0,
|
|
"filament_dissolve_interval": 0,
|
|
"filament_flow_ratio": 0.98,
|
|
"filament_max_speed": 0,
|
|
"filament_minimal_purge_on_wipe_tower": 15,
|
|
"filament_pressure_advance": 0.050,
|
|
"filament_retraction_extra_length": 0,
|
|
"filament_retraction_minimum_travel": 2.0,
|
|
"filament_retract_restart_extra": 0,
|
|
"filament_retract_restart_extra_speed": 0,
|
|
"filament_deretraction_extra_length": 0,
|
|
"filament_deretraction_extra_speed": 0,
|
|
"filament_retract_lift": 0,
|
|
"filament_retract_lift_enforce": "all_surfaces",
|
|
"filament_retract_lift_above": 0,
|
|
"filament_retract_lift_below": 0,
|
|
"filament_retract_when_changing_layer": 1,
|
|
"filament_retract_on_stop": 0,
|
|
"filament_retract_speed": 35,
|
|
"filament_retract_length": 2.5,
|
|
"filament_z_hop": 0,
|
|
"filament_z_hop_types": "normal",
|
|
"filament_z_hop_threshold": 1.0,
|
|
"filament_ramming_volume": 0,
|
|
"filament_ramming_volume_external": 0,
|
|
"filament_ramming_flow": 1,
|
|
"filament_ramming_acceleration": 9000,
|
|
"filament_wipe_temperature": null,
|
|
"filament_wipe_pause": 0,
|
|
"filament_wipe_speed": 35,
|
|
"filament_park_position": 0,
|
|
"filament_park_speed": 35,
|
|
"filament_load_speed": 35,
|
|
"filament_unload_speed": 35,
|
|
"filament_cooling_final_temperature": 140,
|
|
"filament_cooling_initial_temperature": 210,
|
|
"filament_cooling_zone_pause": 0,
|
|
"filament_cooling_zone_fan": 100,
|
|
"filament_cooling_zone_fan_pause": 0,
|
|
"filament_toolchange_delay": 0,
|
|
"filament_deretraction_speed": 35,
|
|
"filament_retract_before_wipe": 0,
|
|
"filament_wipe_before_retract": 0,
|
|
|
|
"filament_vendor": "Generic",
|
|
"filament_color": "#FFFFFF",
|
|
"filament_material": "PLA",
|
|
"filament_material_settings_id": "",
|
|
"filament_settings_id": "",
|
|
"filament_abrasive": 0,
|
|
"filament_hybrid": 0,
|
|
"filament_compatible_printers": "",
|
|
"filament_compatible_printers_condition": "",
|
|
"filament_type": "PLA",
|
|
"filament_density": 1.24,
|
|
"filament_cost": 20,
|
|
"filament_weight": 1000,
|
|
"filament_spool_weight": 0,
|
|
"filament_diameter": 1.75,
|
|
"filament_max_volumetric_speed": 15.0,
|
|
"filament_flow_ratio": 0.98,
|
|
"filament_max_speed": 0,
|
|
"filament_minimal_purge_on_wipe_tower": 15,
|
|
"filament_pressure_advance": 0.050,
|
|
"filament_is_support": 0,
|
|
"filament_soluble": 0,
|
|
"filament_dissolve_interval": 0,
|
|
"filament_abrasive": 0,
|
|
"filament_hybrid": 0,
|
|
"filament_vendor": "Generic",
|
|
"filament_color": "#FFFFFF",
|
|
"filament_material": "PLA"
|
|
}
|
|
}
|