Add all filament profiles for dual hotend setup

Completed filament profiles:
- PETG: Original (240°C, 12mm³/s) & Bambu (245°C, 18mm³/s)
- ABS: Original (250°C, 12mm³/s) & Bambu (255°C, 18mm³/s)
- TPU: Original (225°C, 8mm³/s) & Bambu (230°C, 10mm³/s)
- Carbon Fiber: Bambu ONLY (215°C, 15mm³/s, abrasive!)

Key settings per material:
- PETG: Lower fan (30%), slower retracts to prevent oozing
- ABS: No fan, enclosure required, higher temps
- TPU: Very slow retracts (20-25mm/s), minimal retraction
- Carbon: Abrasive flag set, steel nozzle required

All profiles include:
- Correct max volumetric speeds
- Temperature offsets for steel nozzle (+5°C)
- Shorter retracts for Bambu hotend (1.8mm vs 2.5mm)
- Appropriate Pressure Advance values
- Filament-specific cooling settings

orca-profiles/README.md

@@ -138,17 +138,15 @@ Du könntest auch zwei Macros machen:
 | **Poor Layer Adhesion** | Temp erhöhen | Temp weiter erhöhen (+10°C) |
 | **Clogging** | Hotend reinigen | Heatbreak tauschen |
 
-## 📝 TODO - Fehlende Profile
+## ✅ Alle Profile erstellt (2026-03-12)
 
-Folgende Filament-Profile sollten noch erstellt werden:
+Alle Filament-Profile sind jetzt verfügbar:
 
-- [ ] PETG - Original
-- [ ] PETG - Bambu
-- [ ] ABS - Original
-- [ ] ABS - Bambu
-- [ ] TPU - Original
-- [ ] TPU - Bambu
-- [ ] Carbon/ASA - Bambu (nur Bambu!)
+- [x] PLA - Original & Bambu ✅
+- [x] PETG - Original & Bambu ✅
+- [x] ABS - Original & Bambu ✅
+- [x] TPU - Original & Bambu ✅
+- [x] Carbon Fiber - Bambu ONLY ⚠️ (abrasiv, nur Stahl-Nozzle!)
 
 ## 💡 Tipps