root
1cf9620736
Add all filament profiles for dual hotend setup
...
Completed filament profiles:
- PETG: Original (240°C, 12mm³/s) & Bambu (245°C, 18mm³/s)
- ABS: Original (250°C, 12mm³/s) & Bambu (255°C, 18mm³/s)
- TPU: Original (225°C, 8mm³/s) & Bambu (230°C, 10mm³/s)
- Carbon Fiber: Bambu ONLY (215°C, 15mm³/s, abrasive!)
Key settings per material:
- PETG: Lower fan (30%), slower retracts to prevent oozing
- ABS: No fan, enclosure required, higher temps
- TPU: Very slow retracts (20-25mm/s), minimal retraction
- Carbon: Abrasive flag set, steel nozzle required
All profiles include:
- Correct max volumetric speeds
- Temperature offsets for steel nozzle (+5°C)
- Shorter retracts for Bambu hotend (1.8mm vs 2.5mm)
- Appropriate Pressure Advance values
- Filament-specific cooling settings
2026-03-12 10:44:24 +00:00
root
f49165cda0
Add Orca Slicer profiles for dual hotend setup
...
- process_original.json: Original Elegoo Hotend (15 mm³/s)
- process_bambu.json: Bambu Lab Hotend (23 mm³/s, steel nozzle)
- filament_pla_original.json: PLA for Original Hotend
- filament_pla_bambu.json: PLA for Bambu Hotend (+5°C, shorter retract)
- README.md: Complete documentation with installation guide
Key differences:
- Max flow: 15 vs 23 mm³/s
- Retract: 2.5mm vs 1.8mm
- Temp offset: +5°C for Bambu (steel nozzle)
- Pressure Advance: 0.027 vs 0.022
- Speeds: Higher for Bambu hotend
TODO: Add PETG, ABS, TPU, Carbon profiles
2026-03-12 10:40:48 +00:00
